Cd Player Operation - Jensen CD-545 Instruction Manual

Jensen portable am/fm stereo cd cassette recorder instruction manual

Hide thumbs

Table Of Contents

Table of Contents

Note: This CD player will not only play commercial CDs, but also self-compiled CD-R/RW discs.

Do not attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.

Notes on CD-R/RW Discs

Because of non-standardized format definition/production of CD-R/RW, playback quality &

performance are not guaranteed.

Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions

such as PC performance, writing software, media ability, etc.

Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a

malfunction.

Open the CD Door by pressing the CD Door (#4) where indicated PUSH OPEN/CLOSE.

Carefully place an audio CD with its label side upward in the CD compartment and close the

CD Door by pressing on the CD Door (#4) where indicated PUSH OPEN/CLOSE.

Set the Function Selector (#1) to the "CD" position. The POWER Indicator (#16)

will light. The LED Display (#13) will briefly display flashing "- -"and then the total

number of tracks on the CD will appear in the LED Display (#13) after a few

seconds.

Press the CD PLPA/PAUSE

will light and the CD will start playing from the first track.

Adjust the Volume Control (#5) to obtain the desired sound level from the Built-in

Speakers.

To enhance the bass effect, depress and release the BASS Button (#26) when a "click" is

heard.

To suspend playing, press the CD PLAY/PAUSE

Play/Pause Indicator (#15) will flash.

To resume playing, press the CD PLAY/PAUSE

You can choose to play your favorite track directly by pressing either the Skip Forward

Button (#7) or Skip Backward

the correct track number selected.

To locate a particular passage within a track, keep the CD Search Forward

or CD Search Backward

10. To repeat a particular track, press the CD REPEAT Button (#10) until the CD

Repeat 1/All Indicator (#14) flashes.

11. To repeat the entire

Indicator (#14) lights steadily.

12. To stop playing, press the CD STOP

13. When you wish to turn off the CD Player, set the Function Selector (#1) to the "TAPE" position.

The POWER Indicator will go off.

CD PROGRAMMED PLAY

This function allows the tracks to be played in a programmed sequence.

NOTE: Program can only be set in STOP mode.

In CD stop mode, press the PROGRAM Button (#9) once. Program No. "01"

will appear and blink in the LED Display (#13).

Press the CD Skip Forward

(#8) to select the song to be programmed. For example track 5 is selected.