Hoover 7125-02 User Manual page 7

ASSEMBLY INSTRUCTIONS
4. Position the fan body (A) so that the grille (B) is flush with the
ceiling board. Fig. 4
5. Mount the fan body (A) with grille (B) in place to joist using the
suspension brackets (G) and long wood screws (AA).
6. Remove junction box cover from side of fan body (A). Fig.6
CAUTION: If your electrical wires do not match the
colors listed, you must determine what each house wire
represents before connecting. You may need to consult
an electrical contractor to determine safely.
7. Connect wires as shown in wiring diagram. Using wire nuts
(not included) connect house electrical wires to ventilating fan
wires: black to switch, white to nuetral, green to ground. Fig. 7
Up to 60 Watts
automatic terminal switch
Capacitor
for long
motor
life of
motor
www.homewerksww.com
LIGHT HOUSING
to 120V AC 60Hz
FAN HOUSING
Junction box
black wire
to switch
to neutral
white wire
to ground
green wire
black wire
to switch
white wire
to neutral
green wire
to ground
7
Fig. 4
Ceiling
Grille
Fig. 5
Fig. 6
Fig. 7
board