Gogo ES 8 Owner's Manual page 23

I I I . Y O U R T R A V E L S C O O T E R
BATTERY PACK HANDLE
Figure 9. Battery Pack
SECURING THE SCOOTER
Always secure the Travel Scooter in a forward-facing position in the vehicle. Attach the four tie-down
straps to the designated securement points. See figures 11 and 12. Tighten the straps to sufficiently
remove all slack. Never attach tie-downs to adjustable, moving, or removable parts of the Travel Scooter
such as armrests, shrouds, and wheels. These items should be removed. Position the anchor points for the
rear tie-down straps directly behind the rear securement points on the Travel Scooter. The front tie-down
straps should anchor to floor points that are spaced wider than the Travel Scooter to provide increased
lateral stability.
WARNING! Ensure Travel Scooters are properly secured to the motor vehicle during
transport. Scooters that are not properly secured can become a hazard to the user and
to other vehicle passengers in the event of a crash, sudden stopping or swerving, as the
Travel Scooter could tip or slide out of place.
FRONT SECUREMENT POINTS
Figure 11. Front Securement Points
Go-Go ES8
PLUGS INTO STANDARD
ELECTRICAL OUTLET
PLUGS INTO THE OFF-
BOARD CHARGER PORT
Figure 10. Battery Charger
(10 Ah battery pack)
Figure 12. Rear Securement Points
www.pridemobility.com
PLUGS INTO THE OFF-BOARD
CHARGER PORT
PLUGS INTO STANDARD
ELECTRICAL OUTLET
Figure 10A. Battery Charger
(15 Ah battery pack)
REAR SECUREMENT POINTS
23