Installing / Removing Batteries - Kenwood TK-3130 Instruction Manual

I / R
NSTALLING
In place of the battery pack, you can use 3 AA batterie. Use
high quality alkaline batteries to enjoy longer periods of
battery life.
1 Match the four grooves of the
battery pack with the
corresponding guides on the
back of the transceiver.
2 Slide the battery pack along the
back of the transceiver until the
release latch on the base of the
transceiver locks.
3 To remove the battery pack, pull
back on the release latch and
slide the pack away from the
transceiver.
B
EMOVING ATTERIES
5