Table of Contents
Advertisement
11.18.6 Display of the alarm memory – log menu
The log menu includes a list of the last 10 alarms (only alarms, no service warnings). They appear in chronological
order (LIFO logic).
When the dryer is ON or OFF, and when you are not in another menu, press the
access the log menu.
The access to the log menu is confirmed on the display by the message
Use the
and
arrows to move to the next or previous point (L01 ... L10). Press
value displayed. Alternatively, the parameter that triggered the alarm and the operating hours of the machine at the
moment of the alarm activation are indicated. Press
Press
to leave the log menu (if, after a period of two minutes, no button is pressed, the menu is exited
ESC
automatically).
11.18.7 Control of the dryer via remote control
The DMC24 can easily be controlled via two digital inputs which are connected with terminals 1, 2 and 3 (see electric
diagram).
Close the contact between terminals 2 and 3 to enable the remote control. The
longer possible to switch the dryer on or off from the local control panel (the condensate drain test is possible and you
have access to the info and log menus).
When the contact between terminals 2 and 3 is closed, close the second contact between terminals 1 and 2 to switch
on the dryer. Open the contact between terminals 1 and 2 to switch off the dryer.
Only use potential-free contacts that are suitable for low voltage. Ensure the sufficient insulation of
potentially dangerous voltage-carrying components.
CAUTION!
Automatic restart / remote control ON/OFF. The unit may start up without any active influence!
The user will be responsible for the installation of proper protections for possible sudden power
restoration to the dryer.
11.18.8 Operation of the potential-free failure/alarm contact
The DMC24 is equipped with a potential-free contact to indicate failures or alarm conditions.
Dryer is switched on, no service warning and no alarm (active and not yet reset) indicated.
4
5
6
Dryer is off or a service warning or alarm (active and not yet reset) is indicated.
4
5
6
11.18.9 Connection to a serial line
The DMC24 can be connected to a serial monitoring line, a remote control or a notebook for the download of the alarm
log files (memory).
For further information, please contact your retailer or your service centre.
DRYPOINT® RS 1300-6000 HP45
log
again to return to the log list.
Technical description
log
button for at least one second to
(L01) (first parameter of the menu).
log
to have the selected log
LED lights up and it is no
33
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
