Jensen MP8610BT Owner's Manual page 18

Jensen car cd player owner's manual

Table of Contents

Enlarged version

MP8610BT

Operation (continued)

Audio Menu (continued)

3D Gain

Because speakers are installed in different positions depending on the vehicle design, the 3D-

Surround effect may vary from one vehicle to the next. The 3D Gain Function creates a "Virtual

Speaker" to compensate when speakers are not installed in the ideal position, giving you the

best possible 3D-Surround sound effect.

When in the 3D Gain menu, use the up (+) or down (-) joystick button to turn the 3D Gain "ON"

or "OFF". Once the 3D Gain option is turned on, use the left ( ) joystick button to move to the

Level ajustment parameter. Use the up (+) or down (-) joystick button to adjust the 3-D Gain

Level from "0" to "12".

To achieve the best effect, adjust the level until it suits your individual preference.

NOTE: For quick access to "3D GAIN" once inside the Audio menu, press 7.

Balance/Fader

When in the BAL/FAD menu, use the left ( ) or right ( ) joystick button to adjust the Fader

Range from "F10" to "R10" ("C00" represents an equal balance between the front and rear

speakers). Use the up (+) or down (-) joystick button to adjust the Balance Range from "L10" to

"R10" ("C00" represents an equal balance between the left and right speakers).

NOTE: For quick access to "BAL/FAD" once inside the Audio menu, press 8.

Beep Tone

When the Beep Tone feature is activated, an audible beep tone will be heard each time a

button is pressed on the face of the radio. The Beep Tone is turned "ON" by default. When in

the BEEP TONE menu, use the up (+) or down (-) joystick button to turn the Beep Tone "ON" or

"OFF".

NOTE: For quick access to "BEEP TONE" once inside the Audio menu, press 9.

Table of Contents