Table of Contents
Advertisement
Make a call or launch programs using voice tags
1.
Press the VOICE COMMAND button.
2.
After a "beep" sound, say the recorded voice tag that you have assigned to the phone number you
want to call or the program you want to launch. The system will repeat the voice tag and then dial out
or launch the program automatically.
Note If the system cannot recognize your voice tag, please speak clearly and reduce the surrounding noise, then try
again.
To view and test the voice tags you have created
1.
Tap Start > Settings > Personal tab > Voice Speed Dial.
2.
The Voice Tag tab displays a list that contains all the voice tags you have created. Select an item in the
list, and you can do one of the following:
•
Tap the Record button (
•
Tap the Play button (
•
Tap the Delete button (
13.2 Terminal Services Client
The Terminal Services Client allows you to log on to a PC running Terminal Services or Remote Desktop, and
use all the resources available on that PC. For example, instead of running Word Mobile on your device, you
can run the PC version of Word and access the .doc files available on that PC.
To connect to a Terminal Server
1.
On your device, tap Start > Programs > Terminal Services Client.
2.
Enter the server name.
3.
You can also select a server name in Recent servers if you have recently connected to a server.
4.
Select the Limit size of server desktop to fit on this screen check box if you want to use programs
that have been specifically sized for use with your device.
5.
Tap Connect.
To navigate within Terminal Services Client
When connected to a remote server, you may notice that the screen is displaying more than one horizontal
and vertical scroll bar. Use these scroll bars to either scroll the contents on the PC, or to scroll the PC display
through the Terminal Services Client window.
To make sure you are scrolling the PC display through Terminal Services Client, use the five directional buttons
at the bottom of the Terminal Services Client window. To better fit information on the screen, select the Limit
size of server desktop to fit on this screen check box. For best results, the programs on your desktop PC
should be maximized.
To disconnect without ending a session
1.
From the Terminal Services Client screen on your device, tap Start > Shutdown.
2.
Tap Disconnect.
Notes • Do not use the Start menu on your device.
• If a network administrator has configured Terminal Services Client on your device to reconnect to disconnected
sessions, and you previously disconnected from a Terminal Server without ending the session, the Terminal
Services Client reconnects to that session.
) to rebuild the voice tag.
) to play the voice tag.
) to delete the voice tag.
Using Other Applications 121
Advertisement
Table of Contents
