Switching Telephone Operation On - Mercedes-Benz Comand Operator's Manual

Telephone
Telephone operation

Switching telephone operation on

TEL 1
SEND END MUTE
Locked, please enter code:
2
***
OK 3
ABC/123 Phone Book
Last Calls Calls
P82.85-9376-31US
1 Status line, telephone is not yet logged
onto network
2 Input line for unlock code
3 Confirms the unlock code
Press a.
The menu to enter the unlock code will
appear.
Entering the unlock code
Use the number keys 1 through 0 to
enter the unlock code.
78
Asterisks instead of digits will appear in
the input line.
i
Your unlock code prevents unauthori-
zed persons from using your telephone.
Be sure to memorize this code, a three
digit number, carefully.
Timeport phones use a three-digit code.
V60 phones use a four-digit code. The
head unit will unlock the phone using
the first three digits of the four-digit V60
unlock code.
If you enter an incorrect code, the sys-
tem returns to the menu for entering the
unlock code.
i
You must always enter the unlock code
when you switch on the telephone the
first time (if phone is in locked mode).
Confirming the unlock code
Press the right-hand rotary/push-
button v to confirm OK.
If entered code is correct and the pho-
ne is registered in a network, the phone
is ready for use.
TEL
SEND END
4
Ready
A B C D E F G H I J K L M N O
P Q R S T U V W X Y Z
Phone Book
ABC/123
Last Calls Calls
P82.85-9377-31US
Ready for operation display
4 Telephone is ready for operation,
Ä is highlighted
5 Reception strength, indicated by up to
5 bars >
RM appears if the telephone is not
using the home network and/or is out-
side the home coverage area.
5
MUTE