MSI ATX BX2 User Manual page 102

LAN Resume from Soft-Off
During Disabled, the system will ignore any incoming signal from
the LAN network card. During Enabled, the system will boot up if there's an
incoming signal from the LAN network card.
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system. Then, power off the system. This
function will work the next time you power on.
RTC Alarm Resume From Soft-Off
This function is for setting the Date, Hour, Minute, and Second for
your computer to boot up. During Disabled, you cannot use this function.
During Enabled, Choose the Date, Hour, Minute, and Second:
RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second
Note: If you have change the setting, you must let the system boot up until
it goes to the operating system. Then, power off the system. This
function will work the next time you power on.
Choose which day the system will boot up.
Choose which hour the system will boot up.
Choose which minute the system will boot up.
Choose which second the system will boot up.
4-18
®