LG 50PY2DR Owner's Manual page 75

W atching & Record
W atching & Record
- While recording, you can change channels or inputs, without disturbing the recording. And the screen being
recorded will be shown in the lower-right corner of the main screen.
1. After starting an Instant Record or Reserved Record, change the channel or input.
•You can check the screen being recorded in the lower-right corner the main screen (as shown below).
•Press the PIP button to cancel or show the screen being recorded.
•Press the SWAP button to return the screen being recorded in Watch & Record.
•When changing to the channel being recorded in Watch & Record, screen is changed to Instant Record state or
Reserved Record state.
Note: When digital broadcast is being recorded, another digital broadcast can not be tuned.
- if you turn the power off on recording, this message is displayed as shown below.
- If you selects
And if you selects
screen being recorded
• Watch & Record Input
Record
Digital Analog
Watch
Digital X
0
Analog
Video 0
Front Video 0
0
Component1
Component2 0
0
RGB-PC/DTV
0
HDMI1/DVI
HDMI2
0
Yes , recording stops and then power is off.
No , recording stops and then power is off.
Video Front Video
0 0
0
0 0 0
0
0 0
0
0 0
0
0 0
0
0 0
0
0
0
0 0 0
0
0 0
Operation
Owner's Manual 75