Channel Label Setup; Main Picture Source Selection; Input Label - LG 50PY2DR Owner's Manual

Channel Label Setup

Channel Label Setup
- Choose preset labels for your channels.
- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel -
even if you didn't preset a label for the channel.
1. Press the MENU button and then use
G
2. Press the button and then use
3. Press the G button. You will now see a screen filled with Labels and a preview screen.
4. Use the CH +/- button to select a channel to Label.
D / E / F / G
5. Use button to select the appropriate label for the channel, then press ENTER button to set the Label to
the selected channel.
- If you press ENTER button, you will see the channel banner.

Main Picture Source Selection

Main Picture Source Selection
- Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any
other devices that are connected to your TV.
1. Press the MENU button and then use
2. Press the G button and then use
G
3. Press the button and then use
Cable, Video, Front Video, Component1, Component2, RGB-DTV (or RGB-
PC), HDMI1/DVI, HDMI2.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.

Input Label

Input Label
1. Press the MENU button and then use
2. Press the G button and then use
G
3. Press the button and then use
Video, Component1, Component2, RGB, HDMI1/DVI or HDMI2.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
D / E button to select the
D / E button to select Channel Label
button to select the
D / E
button to select
D / E Main Input
D / E button to select the source: Antenna,
D / E button to select the
button to select
D / E Input Label
D / E button to select the source: Video, Front
SETUP menu.
.
menu.
SETUP
.
SETUP menu.
.
Operation
Owner's Manual 41