LG 50PY2DR Owner's Manual page 74

Operation
Recording
Recording
5. You can also add recording time by pressing the RECORD (
edly to add to the recording time. Each press of
below.
No Change -> +10min -> +20min -> +30min -> +40min ->+50min -> +1hr
The extra recording time added to existing setting value makes final recording time length.
6. After adjusting the recording time, select OK and the progress bar will be displayed.
Elapsed recording time
• Press the EXIT button to hide the Progress Bar. Press the ENTER button to display the progress bar.
7. Press the STOP ( ) to stop recording, or, when the recording duration is reached, the HD DVR will stop recording.
V
Although recording has stopped, the Timeshift features remain active.
Notes:
•When recording, if the available storage space becomes low, the recording will be
•If power is interrupted or turned off too soon after recording, the program may not be saved. Therefore,
( ) button and confirm the recording list, before powering the unit off.
V
•If you press the POWER button while recording, the Screen Saver will initiate and recording will continue.
•Recordings of less than 10 seconds will not be saved.
•To save the disk space while recording analog or digital screen, no data is saved when no signal is present.
•The recording function will not initiate for a copy-protected program.
•After recording, marked times may be somewhat different from actual times.
•In no signal or film source, marked times may be different from actual times.
74 Plasma TV
F / G
C.
Total recording duration
) button during Instant
Ó
button changes the recording duration in the sequence shown
F / G
Record. Press the repeat-
automatically stopped.
first press the