Sony DSC-T7 Service Manual page 14

HELP 06
(disassembly of the control
switch block (RL51710))
3 ST capacitor
guide
1 Screw (M1.4x2.5) silver
2 ST cushion
4 Peel off the
piezo speaker
6 Control switch block
DSC-T7
(RL51710), piezo speaker
5 Flexible board
(Block light guide plate)
Piezo speaker
When removing the piezo speaker from the main frame assembly,
a part of the cushion of the piezo speaker is ripped apart, remaining
on the SP adhesive sheet on the main frame assembly.
When reassembling, remove the SP adhesive sheet and the cushion
of the piezo speaker left on the main frame assembly before using
a new SP adhesive sheet.
At this time, replace the piezo speaker also with a new one.
When reassembling, fit the three dowels of the main frame assembly
into the three positioning holes of the control switch block (RL51710).
Flexible board of the control
switch block (RL51710)
Three
positioning
holes
Main frame assembly
SP adhesive sheet
Main frame assembly
Three
dowels
HELP