Epson TM-T88V Technical Reference Manual page 52

Setting the power supply unit capacity
Selectable from levels 1 to 3 (Low ∼ High) (initial setting: level 3)
Setting the automatic paper cut
• Not use this function (initial setting)
• Cut paper when the cover is closed
• Print logo when paper is cut
Printing logo when paper is cut is not available with memory switch setting mode.
Setting the paper reduction
• Extra upper space reduction: enabled or disabled (initial setting)
• Extra lower space reduction: enabled or disabled (initial setting)
• Line space reduction rate: not reduced (initial setting), 25%, 50%, or 75%
• Line feed reduction rate: not reduced (initial setting), 25%, 50%, or 75%
• Barcode height reduction rate: not reduced (initial setting), 25%, 50%, or 75%
Setting the transmission speed for serial interface
When DIP switches 1-7 and 1-8 are set to ON, the value (initially 38400) can be set to 2400, 4800,
9600, 19200, 38400, 57600, or 115200. (See "Transmission Speed (DIP Switches 1-7/1-8)" on page
40.)
Setting the printer model
When you use the TM-T88V with the APD Ver. 4.00 ~ 4.04, you need to change the printer model
name to "TM-T88IV."
52