Selecting The Busy Status - Epson TM-T88V Technical Reference Manual

Selecting the BUSY Status

With DIP switch 2-1, you can select conditions for invoking a BUSY state as either of the
following:
• When the receive buffer is full
• When the receive buffer is full or the printer is offline
In either case above, the printer enters the BUSY state after power is turned on (including
resetting with the interface) and when a self-test is being run.
Printer BUSY Condition and Status of DIP Switch 2-1
Offline Dur ing th e per iod after power is tur ned on
(including resetting with the interface) to when the
printer is ready to receive data.
During the self-test.
When the cover is open.
During paper feed with the Feed button.
When the printer stops printing due to a paper-end
(when printer has run out of roll paper).
When waiting for the paper Feed button to be
pressed before macro execution.
When an error has occurred.
When the receive buffer becomes full.
46
Printer status
DIP SW 2-1
ON OFF
BUSY BUSY
BUSY BUSY
— BUSY
— BUSY
— BUSY
— BUSY
— BUSY
BUSY BUSY