Garmin GPS 400W Pilot's Manual & Reference page 169

service for LPV approach availability.
An "INTEG" annunciation at the bottom left corner of the
screen indicates that satellite coverage is insufficient to pass
built-in receiver autonomous integrity monitoring (RAIM)
tests. When this occurs, the GPS receiver will continue to
provide navigation information, but should not be used for
primary navigation guidance. Use the GNS 430W's VLOC
receiver or another suitable navigation source.
Sunrise / Sunset— allows you to calculate the time
of sunrise and sunset at any waypoint or your pres-
ent position for a specified date.
Software Versions — provides software ver-
sion information for the operating software within
the GPS receiver, COM transceiver, VOR/localizer
receiver, glideslope receiver and main processor
board.
Database Versions — The Database Versions
Page displays the current Jeppesen database type,
effective date, and expiration date, along with the
version and type of built-in land database.
Terrain Database Versions — The Terrain
Database Versions Page displays the current terrain
and obstacle database types, version, cycle, effective
date, and expiration date.
Checklists
To create a checklist:
1. Select "Checklst" from the utlty page. Press
ENT to dsplay a lst of checklsts.
Press MENU to dsplay an optons menu. Turn
2.
the large right knob to select "Create New
Checklst?" and press ENT.
Use the small and large right knobs to enter
3.
the name of a checklst. Press ENT when fin-
shed. (Up to nne dfferent checklsts can be
created and stored n the 400W-seres unt.)
Use the small and large right knobs to enter
4.
each checklst tem, followed each tme by
ENT. (Each checklst may contan up to 30 lne
tems of as much as sxteen characters long.)
To execute a checklist:
1. Wth the checklsts page dsplayed, turn the
large right knob to select the desred checklst
and press ENT.
190-00356-00 Rev B
9 - AUX PAGES
Utility Page
159