Configuration Settings - Life Fitness Classic Series Operation Manual

5.2 C
ONFIGURATION
CONFIGURATION
SETTING
LANGUAGE
MAX DURATION SETUP
ENGLISH/METRIC UNITS
CUSTOM WORKOUT ENTRY
TELEMETRY
MAXIMUM SPEED
MINIMUM SPEED
PAUSE TIMEOUT
WATTS DISPLAY
METS DISPLAY
PACE DISPLAY
CALORIE PER HOUR DISPLAY
DISTANCE CLIMBED DISPLAY
ACCELERATION RATE
DECELERATION RATE
ERASE CUSTOM WORKOUTS
MAXIMUM INCLINE
START MESSAGE SETUP
QUICK START DISABLE
FIT TEST PLUS
SYSTEM BEEPS
USER LANGUAGE SELECT
MARATHON MODE
BELT NOTIFICATION LIGHT
32
S
ETTINGS
FACTORY
DEFAULT DESCRIPTION
ENGLISH The language of the MESSAGE CENTER display. Choices include English, German, French, Italian, Dutch,
Spanish, Portuguese, and Turkish. Japanese available on units equipped with the Complex Character Display
(CCD) only.
60 Minutes This feature enables fitness club managers to set workout duration limits.
ENGLISH The measurement unit type for weight, distance, and speed.
N/A See Programming Custom Workouts in Section 4.
ON Switching on the telemetry feature makes it possible to use the Polar®-compatible Heart Rate Zone Training
exercise chest strap for monitoring the heart rate.
14.0 (MPH) This is the fastest speed at which the treadmill can operate.
0.5 (MPH) This is the slowest speed at which the treadmill can operate.
1 (minute) This is the maximum time during which a workout can remain in pause mode.
OFF (Int'l: ON) If this option is enabled, the MESSAGE CENTER displays the Watts equivalent of the step rate.
OFF If this option is enabled, the MESSAGE CENTER displays the METs equivalent of the step rate.
ON This feature displays the rate of minutes per mile.
ON (Int'l: OFF) If this option is enabled, the MESSAGE CENTER displays the number of calories burned per hour during the
workout.
OFF The total distance climbed, based on the incline and speed of the treadmill.
3 The rate at which the treadmill accelerates to the selected speed, ranging from 1 (slowest) to 5 (fastest).
3 The rate at which the treadmill decelerates to the selected speed, ranging from 1 (slowest) to 5 (fastest).
N/A This option erases all custom workouts in a single step.
15.0 This option changes the maximum incline grade to a value lower than 15 percent.
N/A See "Using the START MESSAGE Setup" in this section.
OFF Use this option to disable or enable QUICK START workouts via the numeric keys. See "Using QUICK START
Disable" in this section.
ON (Int'l: OFF) Enable/Disable Fit Tests: Army PFT; Navy PRT; Marines PFT; Gerkin protocol; PEB
ON Enable/Disable system beep on key press.
OFF This option, if enabled, gives users the ability to select a language for use during a workout. See the topic titled
User Language Select in this section.
OFF This option, if enabled, allows the user to workout indefinitely. See the topic titled Marathon Mode in this section.
OFF IF ENABLED, This option will alert a fitness club manager if a belt notification exists.