Ddr Module Combination; Installing Ddr Modules - MSI 645 Combo User Manual

MS-6737 ATX Mainboard

DDR Module Combination

Install at least one DIMM module on the slots. Memory modules can be
installed on the slots in any order. You can install either single- or double-
sided modules to meet your own needs.
Memory modules can be installed in any combination as follows:
Slot Memory Module
DDR 1
(Bank 0 & 1) S/D
DDR 2
(Bank 2 & 3) S/D
Maximum System Memory Supported

Installing DDR Modules

1. The DDR DIMM has only one notch on the center of module. The mod-
ule will only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then
push it in until the golden finger on the memory module is deeply in-
serted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
MSI Reminds You...
You can barely see the golden finger if the module is properly
inserted in the socket.
2-8
Total Memory
64MB~1GB
64MB~1GB
64MB~2GB
S: Single Side D: Double Side
Volt Notch