Technical Specifications - Indesit KP 958 MS (X)/ DK Installation And Operating Instructions Manual

• the supply system is efficiently earthed according to
standards and laws in force;
• the socket or double-pole switch are easily accessible when
the appliance is installed.
Important: the wires in the mains lead are coloured in
accordance with the following code:
Green & Yellow
Blue
Brown
As the colours of the wires in the mains lead may not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
Connect the Green & Yellow wire to terminal marked "E" or
or coloured Green or Green & Yellow.
Connect the Brown wire to the terminal marked "L" or coloured
Red.
ENERGY LABEL
Directive 2002/40/EC on the label of electric ovens
Norm EN 50304
Energy consumption for Natural convection
heating mode: Convection
Declared energy consumption for Forced convection Class
heating mode: Fan assisted (mod. KP 958 MS.B)
BURNERS AND NOZZLES SPECIFICATIONS
Table 1
Burner Diameter
Rapid C
Semi-rapid B
Auxiliary A
Triple ring D
Supply pressure
* At 15°C and 1013 mbar-dry gas
Propane G31
GB
ELECTRICAL CONNECTION
- Earth
- Neutral
- Live

TECHNICAL SPECIFICATIONS

Thermal power
(mm) kW (H.s.*)
Nomin. Reduc.
100 3.00 0.7
75 1.65 0.4
55 1.00 0.3
130 3.25 1.3
NOM.
MIN.
MAX
H.s. = 50,37 MJ/kg
Connect the Blue wire to the terminal marked "N" or coloured
Black.
The cable of this appliance are already fitted whit a moulded
plug incorporating a fuse, the value of which is 13A (indicated
on the pin face of the plug). Should the fuse need to be
replaced, an ASTA approved BS1362 fuse must be used of
the same ratingmarked
keep dry. Fuse cover are available from the "parts department"
indicated in your user instructions. If the plug supplied is not
suitable for your actual outlet, it should be cut off and
destroyed. If the fuse cover is detachable, never use the
plug with the cover omitted. If a replacement fuse cover is
required, ensure it is of the same colour asthat visible on the
pin face of the plug (ie red or orange). The end of the flexible
cable should be suitably prepared and the correct plug fitted.
This appliance conforms with the following European Economic
Community directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and
subsequent modifications;
- 90/396/EEC of 29/06/90 (Gas) and subsequent modifications;
- 93/68/EEC of 22/07/93 and subsequent modifications.
Oven accessories which may come into contact with food
are make in materials complying to what is laid down in
EEC Directive 89/109 of 21.12.88 and national regulations
in force.
Liquid gas
By-pass Nozzle Flow *
1/100 1/100 g/h
(mm) (mm)
G30/31
40 86 218
30 64 120
27 50 73
57 91 236
28-30
20
35
Butane G30
Methane G20
G110H.s. = 15,87 MJ/m3
8
. This plug is not waterproof-
ASA
Natural gas City gas
Nozzle Flow* Nozzle
1/100 l/h 1/100
(mm) (mm)
G20
116 286 260
96 157 185
71 95 145
124 309 285
20
17
25
H.s. = 49,47 MJ/kg
H.s. = 37,78 MJ/m 3
Flow*
l/h
G110
680
395
227
770
8
6
15