Equipment overview
A
- Button
1
− for switching the equipment on and off (press)
− Volume control (rotate) page 5, "Setting the volume"
A
- Radio operation page 9, "RADIO mode"
RADIO
2
A
- MEDIA operation page 11, "MEDIA mode"
MEDIA
3
A
- Telephone operation page 15, "PHONE mode"
PHONE
4
A
- Navigation operation page 18, "NAV mode (Navigation)"
NAV
5
A
- Displaying TMC traffic alerts page 24, "Displaying TMC traffic
TMC
6
reports"
A
- Settings in the individual operating modes page 8, "Basic
SETUP
7
settings"
A
and
- buttons for moving forwards/backwards
8
A
CD case page 12, "General information for CD operation"
9
A
Display page 5, "Operating the display"
10
A
- Ejecting CD page 12, "General information for CD operation"
11
A
- Additional information and functions depending on the current
12
operating mode
A
- Return to previous menu item
13
A
AUX socket - to connect an external audio source page 12, "Input
14
AUX"
A
Menu button:
15
− Select a function or a sub-menu, confirm a value (press)
− Move between functions or sub-menus, set a value (turn)
A
Memory card case page 12, "Inserting and removing the memory
16
card"
A
Function keys - Function is context-dependent
17
Switching the unit on and off
–
To switch the unit on/off, press the button
After switching on the unit, the last audio source that was active before switching
off will be played.
If the key is pulled out of the ignition lock while the unit is switched on, the unit will
switch off automatically.
A
.
1
If your vehicle is fitted with the KESSY system, the unit will switch off automatically
after the engine is turned off and the door opened. If you open the door before
turning off the engine, the unit will not switch off until the vehicle is locked.
If the ignition is switched off, the system switches off automatically after approx.
half an hour (vehicle battery protection against discharging).
Setting the volume
–
To increase the volume, turn the button
–
To reduce the volume, turn the button
The change to the volume appears in the unit display.
If the volume is reduced to 0, the speakers are muted. The following symbol will
appear in the display
.
Caution
High volumes can cause hearing damage.
Operating the display
The display of the unit is a so-called "Touchscreen". Areas of the display with a
coloured border are presently "active" and can be operated by touching the display
or by pressing the corresponding button
Some of the functions of the radio navigation button can be operated using the
multifunction steering wheel, refer to the Owner's manual for your vehicle.
General information
A
to the right.
1
A
to the left.
1
Fig. 1 Overview of the operating
elements in the display
A
page 5, "Equipment overview".
17
5