To Write And Send A Text Message - Binatone The brick User Manual

Write message
Inbox
Drafts
Outbox
Sent messages to save sent messages.
SMS
Settings

10.2 To write and send a text message

• Press OK to show Write message
• Press OK again to display a flashing cursor,
Write your message using the digit /letter keys.
Note:
When writing text, use #
(ABC), Lower case (abc) and so on. use the * key
for symbols or punctuation, then use Up
Down
/ 3
/ Down
Volume -
right to already finished part in writing message.
• To send, press OPT and then select SEND TO.
Press OK again to show Enter number, press
OK then enter the full number, including area
code, and show the number in a list. Add more
numbers, if required. Also you can select add
contacts from phonebook.
• Press OPT then select SEND to send the
message.
to write a new message.
to go to your inbox to read received
messages.
to go to your inbox to read saved drafts.
to save messages failed to send.
to check or change
SMS settings.
to up/down select symbols, use digital 1
to left/right select symbols . Use Up
to move the cursor up/down, and use
/ +
to switch to Upper case
key to move the cursor left /
/
23