Horizon Fitness Omega III HRC Entertaiment Owner's Manual page 23

5. P/RESET
1>. Here are such functions are bellow: Auto Search, Search Be hand, Modulate By
hand, Band, Channel and Clear.
2>. Enter into PRESET, press CH+/CH- to select the item which need to be set and it's
indicated by arrowhead.. Characters are in red.
3>. Press VOL+/ VOL- to set the number of the selected items. When it's in modulate
and search by hand function, press VOL+ to move upwards, press VOL- to move down
wards.
4>. Press CH+/CH- t o choose the itch Auto Search. Press VOL+/VOL- to start Auto
Search. and put into automatic Remember and storage upon completion of Auto
Search, Choose the channel in the order of V-L
to program NO. 0 upon completion.
5>. All the setting numbers will be preserved automatically in the Eeprom address.
6>. It will quit the menu automatically if no any operation exceeds ten seconds.
Notes:I. Auto Search
II. When receive signal under Search. the Program Indication Bar should turn from
red into green, which means the optimum position for signal storage. If channel under
weak signal is received, the channel storage system wills automatically it as-no signal.
6. CLOCK
1>. Here are such functions are bellow: Sleep Time, OFF Time, On Time, Attention,
Booked Time and Booked Chinned.
2>. Press VOL+/VOL- to set up clock, then press CH+/CH- to choose ON Time. VOL-
Adjust hour VOL+ Adjust mute CH+/CH- Select items to be setup.
23
C. SYS
S. SYS
SWAP
COPY
WEAK
AUTO
SEARCH
FINE
BAND
PROGRAM
SKIP
Start from Program No. 0
AUTO
0
0
SIGNAL
V-H UHF. And return
SEARCH
TUNE
UHF
23
D/K
-
OFF