Installing Rimm Modules - MSI MS-6545 User Manual

Chapter 2

Installing RIMM Modules

You can install two or four RIMM modules in the following combination:
DIMM Socket
Socket 1
(Bank 0 & Bank 1)
Socket 2
(Bank 2 & Bank 3)
Socket 3
(Bank 4 & Bank 5)
Socket 4
(Bank 6 & Bank 7)
Total System Memory
Note: If only two RIMM slots are
populated, you must install C-RIMM
(Continuity RIMM) modules on the other
unused RIMM slots. A C-RIMM module is a dummy module for continuing
the signal connection.
1.
The RIMM slot has 2 Notch
Keys, so the RIMM memory
module can only fit in one
orientation.
RIMM Module
3.
The plastic clips at sides of the
RIMM slot will automatically
close.
Memory Module Total Memory
32MB, 64MB, 128MB, 32MB ~ 512MB
256MB, 512MB
32MB, 64MB, 128MB, 32MB ~ 512MB
256MB, 512MB
32MB, 64MB, 128MB, 32MB ~ 512MB
256MB, 512MB
32MB, 64MB, 128MB, 32MB ~ 512MB
256MB, 512MB
64MB ~ 2GB
C-RIMM Module
2.
Insert the RIMM memory module
vertically into the RIMM slot.
Then push it in.
4.
If you won't insert any RIMM
modules on the other two RIMM
slots, you must install C-RIMM
modules on the empty slots.
2-6
NOTCH