MSI MS-6545 User Manual page 102

Appendix C
Installing GeneLink™ LAN Driver
Before you use the function, you need to install the GeneLink™ LAN Driver
to all PCs connected via USB PC to PC cables.
Step 1. Installing driver
1. Insert the driver CD and click "USB PC to PC" button to install the driver.
2. The welcome dialog box appears and click Next > button.
3. Choose the destination folder and click Next > button.
4. Select components that you want to install and then click Next > button.
(GeneLink LAN Driver is used only for those PCs connected via USB
TM
PC to PC port so that resources are shared between these PCs;
GeneLink TM Software Router allows your PC to connect to another
existing Home/Office LAN for network resource or Internet sharing.)
5. The Setup Program will install all necessary components automatically.
6. Setup completes. Then select 'Yes, I want to restart my computer now'
and click "FInish" button to reboot your computer for updating your
driver configuration.
After you complete the installation procedures, you'll find Setup Program
has installed GeneLink TM network driver in your computer. It binds TCP/IP,
NetBEUI and IPX protocols to GeneLink
Step 2 – Connect your PCs via the USB PC to PC cable
Step 3 - Network Login
When you restart your computer, you will be prompted for a user name and
password to login your network. Please enter an unique name for your PC.
Step 4 – Sharing your resources and Connecting to Internet
You need to manually share your resources (files, folders, drives and
printers) to make them accessible for other computers. For Internet
accessing, you must define which computer (That has already been con-
nected to Internet) should install GeneLink
clients accessing Internet resources through GeneLink
have installed GeneLink LAN driver.
TM
device.
TM
TM Software Router. And all
USB port should
TM
C-2