Grease Application Locations; Resetting The Grease Up Counter - Brother KE-430D Instruction Manual

<Grease application locations>
4534Q
* Left-hand thread
<Resetting the grease up counter>
Turn the machine pulley until the
screw (1) can be seen.
Be careful not to drop the screw (2)
when removing it.
4536Q
KE-430D, BE-438D
Once the grease has been applied, follow the procedure
below to reset the cumulative number of stitches between
grease applications.
1. Turn on the power switch. "GrE" and "AS.UP" will flash
in the program No. display (1) and the menu display (2)
and the buzzer will sound.
2. Press the RESET key (3). The program No. display (1)
and the menu display (2) will return to their normal
displays.
3. While pressing the TEST key (4), press the
"GrS" will appear in the program No. display (1), and
the cumulative number of stitches until greasing is
required will appear in the menu display (2) in units of
100,000 stitches.
(The number of stitches will be displayed in all seven
digits of the program No. display (1) and menu display
(2) in units of 100 stitches while the
pressed.)
4. Press the key (7). The cumulative number of
stitches will be reset to "0000".
5. Press and hold the RESET key (3) for 2 seconds or
more. (This completes the reset procedure.)
6. When you press the TEST key (4), the displays will
return to their normal displays.
8. MAINTENANCE
4535Q
key (5).
key (6) is being
54