Figure 2-6. Transmission Hump Trunnion Mounting; Figure 2-7. Below Dash Trunnion Mounting - Motorola Astro XTL 1500 Installation Manual

Standard Configurations: Radio Mounting
2.2.1 Dash Mount with Trunnion
1. Select the location to mount your radio on the transmission hump (see
the dash (see
the transmission housing is not affected.
2. Using the trunnion mounting bracket as a template, mark the positions of the holes on the
mounting surface. Use the innermost four holes for a curved mounting surface such as the
transmission hump, and the four outmost holes for a flat surface such as under the dash.
3. Center punch the spots you have marked and realign the trunnion in position.
4. Secure the trunnion mounting bracket with the four self-drilling screws provided (see
Figure 2-6
5. Ensure that the plastic guides are aligned (horizontal) to the grooves of the trunnion. Slide the
radio into the grooves until it snaps into place (see
wing screws provided.
6815851H01-O
Figure 2-7). When mounting the trunnion on the transmission hump take care
and Figure 2-7).
Wing Screw
Trunnion

Figure 2-6. Transmission Hump Trunnion Mounting

Trunnion
Wing Screw

Figure 2-7. Below Dash Trunnion Mounting

Figure 2-6). Secure the radio with the two
Plastic Guides
Tabs
Groove
Threaded Hole
for Wing Screw
Groove
Threaded Hole
for Wing Screw
Figure 2-6) or under
Wing Screw
Holes for
Microphone
S-Hook
Wing Screw
June 3, 2005
2-5