Function Setting Method - Mitsubishi Heavy Industries FDTCVA SERIES Technical Manual

(b) Function setting method
1) Stop the air conditioner
2) Press the SET and MODE buttons simultaneously for
3 seconds or longer.
The screen display will be switched as follows:
" SELECT ITEM"
" SET"
"FUNCTION SET
FUNCTION SET
3) Press the SET button.
The unit will enter the function setting mode. The
screen display will charge to "
4) Check which category your desired setting belongs to, "
or "I/U FUNCTION
5) Press either or
Select either "
FUNCTION
6) Press the SET button.
7) When " FUNCTION
"DATA LOADING" (blinking)
"GRILLE SET" (Function number:
The screen display will be switched like this.
Press either or
"Function number:
one. Select a desired function.
Press the SET button.
The screen display will be switched as follows:
" SETTING"
Press either or
A list of "Settings:
Press the SET button.
The selected setting is displayed for
2 seconds, then followed by "SET
COMPLETE" and the function setting
process is completed.
Then the screen display will be swiched
to "Function number:
scription: ," so if you want to con-
tinue to set another function, repeat the
steps as explained above.
To fi nish the function setting process,
please proceed to Step 8).
"
FUNCTION
" (Indoor unit function).
button.
FUNCTION " or "I/U FUNCTION
I/U FUNCTION
" is selected.
" FUNCTION"
, Function description:
button.
, Function description:
"Setting: " (ex. "AUTO RUN ON")
button.
" will be displayed one by one. Select your desired setting.
, Function de-
Operating guide message
Function description: B , Settting: C
Selector button
".
Indoor unit selector button
FUNCTION
".
)
"from the list of remote controller unit functions will be displayed one by
* When " AUTO RUN SET " is selected.
AUTO RUN SET
AUTO RUN ON
AUTO RUN ON
229
- -
Function number: A
AUTO RUN SET
Previous screen button
(Remote controller unit function)"
Function number: A
Function description: B
Setting: C
AUTO RUN OFF
SET COMPLETE
Confirm Button
Finish Button
Start Button