Canon DU7-1101-000 Service Manual page 78

CHAPTER 2 OPERATIONS
3] The feeding belt is rotated to move the original to the reversing assembly. At this time, the lead-
ing edge of the first original is butted against the reversing roller to remove the skew.
Butted.
4] The reversing roller and the feeding belt are rotated to move the original to the copyboard glass.
The first original is moved for a specific length by the feeding belt after its trailing edge has
moved past the pre-registration roller sensor (S2), and is stopped.
Pre-registration
paper sensor (S2)
5] The copier's scanner starts to make a copy.
2-62
COPYRIGHT © 1999 CANON INC.
Figure 2-269
Figure 2-270
Copy
Figure 2-271
CANON ADF FOR iR600 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)