Removing The Belt Motor Unit - Canon DU7-1101-000 Service Manual

3) Disconnect the connector [4] of the pickup
motor unit [3] and the connector [6] of the
open/closed sensor (rear) [5].
4) Remove the two mounting screws [7], and
detach the pickup motor unit [3].
4.

Removing the Belt Motor Unit

1) Remove the separation motor unit and the
pickup motor unit.
2) Disconnect the connector [2] (J72) of the
belt motor driver PCB [1].
COPYRIGHT © 1999 CANON INC. CANON ADF FOR iR600 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 3 MECHANICAL SYSTEM
[3]
[4]
Figure 3-207
[3]
Figure 3-208
[2]
Figure 3-209
[5]
[6]
[7]
[1]
3-9