Table of Contents
Advertisement
CHAPTER 2 OPERATIONS
3] The reversing roller and the feeding belt are rotated to move the original.
The feeding belt is rotated after the trailing edge of the first original has moved past the reversal
sensor (S1), and the original is stopped.
Reversal sensor (S1)
4] The copier starts to make a copy by moving its scanner.
Scanning lamp
5] When the copier's scanner starts to move in reverse, the feeding belt is rotated to move the first
original to the reversing assembly. At this time, the leading edge of the original is butted against
the reversing roller to remove the skew.
Butted.
2-56
COPYRIGHT © 1999 CANON INC.
Feeding belt
Figure 2-258
Copy
Figure 2-259
Figure 2-260
CANON ADF FOR iR600 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Advertisement
Table of Contents
Troubleshooting
