Table of Contents
Advertisement
Ofrecido por www.electromanuales.com
5. The system prompts for a name for the phone. Use
a name that best describes the phone. This name
will be used to indicate which phone is connected.
The system then confirms the name provided.
6. The system responds with <Phone name> has
been successfully paired after the pairing process
is complete.
7. Repeat Steps 1 through 7 for additional phones to
be paired.
Listing All Paired and Connected Phones
g
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say List . The system lists all the paired Bluetooth
devices. If a phone is connected to the vehicle, the
system will say Is connected after the connected
phone.
Deleting a Paired Phone
g
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
for two seconds. The system
for two seconds. The system
3. Say Delete . The system asks which phone to
delete followed by a tone.
4. Say the name of the phone to be deleted. If the
phone name is unknown, use the List command
for a list of all paired phones. The system responds
with Would you like to delete <phone name>? Yes
or No followed by a tone
5. Say Yes to delete the phone. The system
responds with OK, deleting <phone name> .
Linking to a Different Phone
g
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say Change phone . The system responds with
Please wait while I search for other phones .
If another phone is found, the response will be
<Phone name> is now connected .
If another phone is not found, the original
phone remains connected.
for two seconds. The system
4-115
Advertisement
Chapters
Table of Contents
