Table of Contents
Advertisement
SCSI hard disk subsystem
Components and indicators of the hard disk module
The hard disk drives which can be ordered for the server are supplied already
mounted in the hard disk modules. The slide-in units have a status indicator and
an error indicator. Empty bays are covered with dummy covers.
1
1
Hard disk module (hard disk carrier with installed hard disk drive)
2
Indicators
HDD access (LED green)
HDD error (LED orange)
3
Handle for engaging and disengaging the hard disk module
4
Locking button
5
Indentation for a sticker with the current drive identifier
6
Dummy cover
7
Locking tabs
Functions of the indicators
Green LED:
Orange LED:
02
TX600
84
–
–
2
3 4
5
The green indicator lights up when a hard disk drive is being
accessed.
You may not replace the hard disk module at this time!
The orange LED flashes when, in conjunction with a RAID
controller, the configuration is being determined or a
rebuild is being carried out.
You may not replace the hard disk module at this time!
The orange LED remains lit if the hard disk drive is deacti-
vated and/or defective and can be replaced.
October 2003
Removal/installation routines
6
7
U41057-J16-Z146-1-76
Advertisement
Table of Contents
