Bosch Security Systems | 02 April - Bosch LTC 8850 Series Instruction Manual

EN | 70
LTC 8850 | Instruction Manual | VCR Server
4.5.2 Custom VCR Command Strings Dialog Box
4.5.2.1 Description
This dialog box appears when Command Strings on
the control panel is clicked. This is where an installer
would enter the command strings needed to carry out
any actions. The VCR's user manual should list the
command strings.
Figure 115 Custom Strings Dialog Box
4.5.2.2 Entering Nonprinting Characters
VCRs require a special nonprinting character to signal
the beginning and/or ending of a command string. To
enter a nonprinting character use a backslash (\)
followed by the decimal ASCII character code. For
example (control-B)FPL(control-C) would be entered
as \2 FPL \3. A space is required before and after a
nonprinting character (except at the beginning or
ending of the command string).
4.5.2.3 Saving Command Strings as a Model Type
For installations where multiple custom VCR type
controls have to be configured with the same set of
command strings, it is useful to save the command
strings as a model type. This will save the installer
from reentering the commands. To do this, enter a
name in the Model Name box and click Save
Command Strings as a Model Type. The command
strings will be saved as a file called xxxxxxxx.VCR in
the \VCR directory, where xxxxxxxx is the name
entered in the Model Name box. The user entered
model name will then appear in the Communication
Setup dialog box as a new model to select from.

Bosch Security Systems | 02 April 2004