Table of Contents
Advertisement
· Remove the paper roller from the
paper guide.
(1) Pull the paper roller downward
to remove it from the paper
guide.
· Remove the operation panel block
from the base plate assembly.
(1) Using a Phillips screwdriver,
remove a screw (M2.6 x 6) from
the operation panel block.
(2) Remove the operation panel block
from the base plate assembly.
· Remove a lever from the base plate
assembly.
(1) Using the Phillips screwdriver,
remove 1 screw(PHT, M2.6 x 5)
used to secure the lever.
(2) Remove the lever from the base
plate assembly.
5. Remove an auto cutter assembly.
(1) Put the regular screwdriver into two
holes located at the top of the case
and disengage paper feed guide
jaws.
(2) Pull out the auto cutter assembly to
this side.
- 9 -
CBM-292/293 Service Manual
CITIZEN
Advertisement
Table of Contents
