Citizen CBM-292 Service Manual page 8

4. Remove a base plate assembly.
(1) Remove an E-ring from a
shaft.
(2) Pull out the shaft.
(3) Pushing a lever inside, pull
out the base plate assembly
to this side.
· Remove the
(LT381H) from
assembly.
(1) Using a Phillips screwdriver,
remove two screws (M2.6 x 5)
from the printer mechanism.
(2) Press the printer mechanism
inside to disengage from the base
plate.
· Remove the paper guide from the
base plate assembly
(1) Press the paper guide inside to
disengage it from the base plate.
printer mechanism
the base plate
- 8 -
CBM-292/293 Service Manual
CITIZEN