Sharp SF-1014 Service Manual page 49

C
2 Remove two screws
and remove the motor.
6-4. Toner density sensor
7. Operation panel section/medium
cabinet
1 Open the front cabinet.
A
2 Remove three screws and two harnesses from the operation
panel.
3 Remove the operation panel unit.
A
B
A
4 When removing the medium cabinet, first remove the process unit
and the developer unit then remove four screws
the medium cabinet.
A
B
B
and remove
8. Major parts in the frame side
8-1. Ozone filter
1 Remove the document glass.
2 Remove the black sheet and remove the ozone filter.
8-2. Optical unit cooling fan removal
1 Remove the rear cabinet.
2 Remove as shown below.
6 – 14