Drum Section - Sharp SF-1014 Service Manual

5. Drum section

5-1. Drum unit removal
1 Open the front cover.
2 While pressing down the release lever
B
cartridge slowly. (Arrow )
3 Remove the screw and remove the drum unit.
A
B
6. Developer section
6-1. Developer unit removal
1 Open the front cover.
2 While pressing down the release lever, open the toner cartridge
slowly and remove it.
A
3 Loosen the step screw .
4 Pull out the developer unit.
A
6-2. Developer cartridge removal
1 Place the magnet roller of the developer unit on the box to protect
A
, open the toner
2 As shown in the figure below, open the section which is pressing
6-3. Toner motor removal
1 Remove four short screws
6 – 13
it.
the cartridge pawl with a screwdriver, and pull out the developer
cartridge.
A
connector, and separate the toner cartridge section.
B
and one long screw , and the