6. Press "4" button on the normal remote control unit
for Red adjustment. Press "6" button on the normal
remote control unit for Blue adjustment.
7. In each color mode, press "CH o / p" button to ad-
just the values of color.
8. Adjust Red and Blue color so that the temperature
becomes 9200°K-5MPCD (x: 288 / y: 288) ±3%.
9. For low light adjustment, bring the optical receptor
to the 4th scale as shown below.
4th gray scale
10. Press "1" button on the normal remote control unit
for Red adjustment. Press "3" button on the normal
remote control unit for Blue adjustment.
11. In each color mode, press "CH o / p" button to ad-
just the values of color.
12. Adjust Red and Blue color so that the temperature
becomes 9200°K-5MPCD (x: 288 / y: 288) ±3%.
13. Check adjustment value in high light adjustment
again. If adjustment value is not within specifica-
tion, repeat steps 2-8.
14. To enter the adjustment mode in the Composite
mode (Video 1 mode), press "VOL p" button once
on the normal remote control unit.
Fig. 7
1-6-3
L0653EA