Common Procedures; Pressure Relief Procedure; Trigger Lock; Spray Tip Position - Graco ProShot 258865 Operation Manual

Common Procedures

Pressure Relief Procedure

Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep hands
and other body parts away from the front of the sprayer.
For example, do not try to stop the paint flow with any
part of the body.
This sprayer builds up an internal pressure of 2,000 psi
during use. Follow this Pressure Relief Procedure
whenever you stop spraying and before cleaning,
checking, servicing, or transporting equipment to
prevent serious injury.
1. Engage trigger lock.
2. Put prime/relief valve UP to release pressure.

Trigger Lock

Always engage the trigger lock when you stop spraying
to prevent the sprayer from being triggered accidentally
by hand, or if dropped or bumped.
ti14994a
Trigger Locked
6
ti14999a
ti14995a
Trigger Unlocked
(red ring is visible)

Spray Tip Position

Always perform Pressure Relief Procedure before
adjusting spray tip position.
ti14985a
ti14991a
Tip Reversed
Tip Forward
(UNCLOG position)
(SPRAY position)

Prime/Relief Valve Position

ti14999a
UP position
(Releases pump pressure)
Common Procedures
ti15510a
ti15425a
DOWN position
(Ready to spray)
3A0153E