Table of Contents
Advertisement
Installing the Hardware
When the GPS receiver is correctly connected, the display shows GPS Data
OK. If there is a problem with the GPS connection, the display shows Check
GPS. When the display shows GPS Data OK, press the
open the GPS status screen and see detailed GPS data:
Course
Latitude
Longitude
Configuring the GPS
If the radio is receiving valid GPS data, it will automatically set the clock to
your local time based on the GPS location. You can adjust your local time
forward or back one hour if necessary (for example, if you are close to the
border of a time zone); you can also adjust for Daylight Savings Time.
Follow the steps below to adjust the time:
MENU
1.
Display the menu and choose the
2.
Select
3.
The display shows your current local time. To adjust the time forward
one hour, use the
use the
finished.
4.
The display prompts you to confirm the setting: choose
new time or Cancel to exit time setup without saving. The radio returns
to the GPS Setup menu.
5.
If your local area observes Daylight Savings Time, highlight
Save and press the
06/20 11:00:00
Date
o
208
o
35
o
139
Setup
GPS Setup
SELECT
SELECT
GPS Setup and then choose Time Adjust.
CHANNEL UP
CHANNEL DOWN
Time
16
30. 0 KT
40. 610 N
46. 564 E
Time Adjust
SELECT
Setup sub-menu.
button. To adjust the time back one hour,
button. Press the
button.
SELECT
47
button to
SELECT
Current
channel
Speed
Time Adjust
09
: 14
Use the up or down
arrows to adjust the
time by one hour.
button when you are
SELECT
Set to save the
16
Daylight
Advertisement
Table of Contents
