Table of Contents
Advertisement
Using Digital Selective Calling (DSC) Features
MENU
1.
Display the menu and choose the DSC Call sub-menu.
2.
Select Standby to place your radio in standby mode. The radio displays
the standby screen, above.
3.
To cancel standby and return to the mode your radio was in, press any
button.
Disabling automatic channel switching
If you are involved in a bridge-to-bridge call, you may not want the radio to
automatically switch channels when it receives a DSC call. In cases like this,
you can disable automatic channel switching. If you receive an individual call,
the radio will respond with an unattended code, just as if the radio were in
Standby.
1.
Press the
2.
Select
3.
Highlight
automatically switch channels until you reactivate this feature.
NOTE: Use this feature with caution. Deactivating automatic switching and
then forgetting it can make it hard for you to receive DSC calls.
DSC Call
SELECT
button to display the menu.
MENU-PA
Setup and then Auto CH SW.
Off and press the
1 Watt
Memory
Standby
DSC Standby
SELECT
Unattended
button. The radio will not
SELECT
39
88
INT
Advertisement
Table of Contents
