Server Defaults; Radius Authentication Servers; Ldap Authentication Servers - Alcatel OmniSwitch 6624 Network Configuration Manual

Managing Authentication Servers

Server Defaults

The defaults for authentication server configuration on the switch are listed in the tables in the next
sections.

RADIUS Authentication Servers

Defaults for the aaa radius-server
Description
Number of retries on the server before the
switch tries a backup server
Timeout for server replies to authentication
requests
UDP destination port for authentication
UDP destination port for accounting
* The port defaults are based on the older RADIUS standards; some servers are set up with port numbers
based on the newer standards (ports 1812 and 1813 respectively).

LDAP Authentication Servers

Defaults for the aaa ldap-server
Description
The port number for the server
Number of retries on the server before the
switch tries a backup server
Timeout for server replies to authentication
requests
Whether a Secure Socket Layer is configured
for the server
OmniSwitch 6624/6648 Network Configuration Guide
command are as follows:
Keyword
retransmit
timeout
auth-port
acct-port
command are as follows:
Keyword
port
retransmit
timeout
ssl | no ssl
April 2004
Server Defaults
Default
3
2
1645*
1646*
Default
389 (SSL disabled)
636 (SSL enabled)
3
2
no ssl
page 17-3