System Defaults - Alcatel OmniStack 6300-24 User Manual

Multicast Filtering – Specific multicast traffic can be assigned to its own VLAN to
ensure that it does not interfere with normal network traffic and to guarantee
real-time delivery by setting the required priority level for the designated VLAN. The
switch uses IGMP Snooping and Query to manage multicast group registration.
AMAP – The AMAP protocol enables a switch to discover the topology of other
AMAP-aware devices in the network. The protocol allows each switch to determine if
other AMAP-aware switches are adjacent to it.

System Defaults

The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file should be set as
the startup configuration file (page 3-18).
The following table lists some of the basic system defaults.
Function
Console Port
Connection
Authentication
Web Management
Table 1-2. System Defaults
Parameter
Baud Rate
Data bits
Stop bits
Parity
Local Console Timeout
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec from Normal
Exec Level
RADIUS Authentication
TACACS Authentication
802.1x Port Authentication
HTTPS
SSH
Port Security
HTTP Server
HTTP Port Number
HTTP Secure Server
HTTP Secure Port Number
System Defaults
Default
auto
8
1
none
0 (disabled)
Username "admin"
Password "admin"
Username "guest"
Password "guest"
Password "super"
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Enabled
80
Enabled
443
1
1-5