Technical Support; Factory Defaults - Alcatel OmniAccess 2.0 Quick Installation Manual

ance configuration to factory defaults. Do not enter 3 unless directed to do so by Alcatel

Technical Support.)

BOOT Uncompressing RTOS Image ... OK
Loading Code at f0100000 ...
Relocating Code to 0785e000, end 07fa649e ... OK
Detecting hardware . . . .
(This may take a long time. Do not reboot the Alcatel OmniAccess Switch or Appliance at this
time.)
(The rest of this process takes two to three minutes. Do not reboot the Alcatel OmniAccess
Switch or Appliance until you receive the user login prompt.)
Software Copyright 2004 Airespace, Inc. All rights reserved.
AWOS Version 2.0.90.3
Checking for new bootloader: Upgrading... ok
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Network Services: ok
Starting ARP Services: ok
Starting System Services: ok
Starting Fast Path Hardware Acceleration: ok
Starting Switching Services: ok
Starting QOS Services: ok
Starting Network Interfaces: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting LWAPP: ok
Starting Crypto Accelerator: ok
Starting Certificate Database: ok
Starting VPN Services: ok
Starting Security Services: ok
Starting Policy Manager: ok
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Mobility Management: ok
Starting Authentication Engine: ok
Starting Broadcast Services: ok
Starting Power Over Ethernet Services: ok
Starting Logging Services: ok
Starting Management Services:
Web Server: ok
CLI: ok
Secure Web: Web Authentication Certificate not found (error).
(A01)
Enter User Name (or 'Recover-Config' to reset configuration to factory defaults)
User:
-
If this is the first time an Alcatel OmniAccess Switch or Appliance has been powered up
with a factory Alcatel Wireless Operating System software load, or if you enter
'Recover-Config' in the User: prompt, the bootup script runs the
prompts you for basic configuration inputs.
-
If this is the second or later time you have powered up an Alcatel OmniAccess Switch or
Appliance, the bootup script prompts you for a login and password, or enter
'Recover-Config' to reset the Alcatel OmniAccess Switch or Appliance configuration to

factory defaults.

In either of the last two cases, the Alcatel OmniAccess Switch or Appliance has passed the POST test.
3/17/04
90-100775-300 Rev 1Alcatel OmniAccess Switch and Appliance Quick Install Guide
Step 5: Performing Power On Self Test
Startup Wizard, which
12