D-Link DSL-2760U User Manual page 65

D-Link DSL-2760U USER'S MANUAL
Enter the Destination Network Address, Subnet Mask, and the available
WAN interface from the User Interface drop-down menu. Click the
Apply/Save button to add the entry to the routing table.
Routing Interface Protocol (RIP) Configuration
To activate RIP for the WAN Interface, select the desired RIP version and
operation and place a check in the 'Enabled' checkbox. To stop RIP on the
WAN Interface, uncheck the 'Enabled' checkbox. Click the Apply/Save
button to star/stop RIP and save the configuration.
NOTE: RIP CANNOT BE CONFIGURED on the WAN interface which has
NAT enabled (such as PPPoE).
65