Information You Will Need About; Adsl Service Provider - D-Link DSL-2760U User Manual

D-Link DSL-2760U USER'S MANUAL
Most users will not be required to change this setting. The Virtual Channel Identifier (VCI) used in conjunction with the VPI to identify the data path between your
ADSL service provider's network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI
as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management
interface.
Information you will need about DSL-2760U
Username
This is the Username needed access the Router's management interface. When you attempt to connect to the device through a web browser you will be
prompted to enter this Username. The default Username for the Router is "admin." The user cannot change this.
Password
This is the Password you will be prompted to enter when you access the Router's management interface. The default Password is "admin." The user may change
this.
LAN IP addresses for the DSL-2760U
This is the IP address you will enter into the Address field of your web browser to access the Router's configuration graphical user interface (GUI) using a web
browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will be the base IP address
used for DHCP service on the LAN when DHCP is enabled.
LAN Subnet Mask for the DSL-2760U
This is the subnet mask used by the DSL-2760U, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later.
12