Gps Settings; Enabling / Disabling Gps; Setting The Gps Mode - NETGEAR 341U Sprint User Manual

GPS Settings

Your NETGEAR 341U USB Modem provides GPS functionality to help you figure out where you are
and get you where you're going.
There are a couple of requirements to access the GPS service.
You must accept the GPS privacy agreement.
n
GPS must be enabled.
n
The GPS service may not be available if you are indoors. (You may be able to get a GPS lock if your
device is very close to a window.) GPS receivers must be able to lock onto the global positioning
satellites to accurately determine position. The number of obstructions present indoors often makes
accurate position determination impossible.

Enabling / Disabling GPS

Before you can access GPS services, you must enable GPS on the NETGEAR 341U Manager's
GPS page.
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click GPS.
3. In the GPS Settings section, select Yes next to "Enable GPS" (or select No to disable GPS).
4. Click Submit.

Setting the GPS Mode

The GPS mode determines how often location fixes are done.
Location fixes can be done:
Once ("one-time"), or
n
Periodically ("continuous")
n
You can set the GPS mode from the NETGEAR 341U Manager's GPS page:
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click GPS.
3. In the GPS Settings section beside GPS Mode, select the desired mode ("One-time" or
"Continuous").
4. Click Submit.
GPS Settings 47