General Guide; To Charge The Battery Using Battery Power; To Remove The Watch From The Interface/Charger Unit - Casio 2240 Instruction Manual

Casio 2240 watches instruction manual
Table of Contents

Advertisement

To charge the battery using battery power

1. Open the battery compartment cover on the back of the Interface/Charger
Unit as shown in the illustrations below.
Slide lock.
2. Load six AAA-size alkaline batteries (available separately) into the battery
compartment.
• Use only alkaline batteries.
• Make sure the plus (+) and minus (–) ends of the batteries are facing
correctly when you load them into the battery compartment.
3. Slide the battery compartment cover back into place and make sure it
closes securely. Next, slide the lock back to its original position.

GENERAL GUIDE

• Press MODE from mode to mode.
• Press MENU in any mode to display a FUNCTION Screen. Press MENU
while a FUNCTION screen is on the display to change to the MENU
Screen.
Timekeeping Mode
Press MODE.
Position Screen
GPS Mode
Plot Screen
Slide cover.
Altitude Graph
Screen
L
Graphical
Navigation Screen
Note
• When you are charging under battery power, if the green indicator goes out
while charging is in progress (which is indicated when the red indicator is
lit), you should replace the batteries you are using with a full set of new
ones and charge again.

To remove the watch from the Interface/Charger Unit

1. Press the release button to release the tray.
2. Raise the rod that is holding the watch's terminal cover open.
3. Remove the watch.
4. Carefully lower the rod and secure it in place to protect it against damage.
5. Securely close the watch's terminal cover.
6. Unplug the power cord from the wall outlet.
Note
• The amount of operation you can expect on a full charge depends on
conditions when the battery is charged, the conditions of the battery,
temperature, and other factors.
• The watch's rechargeable battery requires periodic replacement. If the
amount of operation provided by each full charge becomes noticeably
short, it probably means that you need to have the battery replaced.
• Contact your original dealer or CASIO distributor about having the
rechargeable battery replaced. Note that you will be charged for battery
replacement.
• Pressing MODE or MENU while the MENU Screen is on the display returns
to the screen from which you started (Timekeeping or GPS Mode Screen).
• Holding down MENU for about one second returns directly to the
Timekeeping Mode.
• The watch beeps whenever you press a button to change to another mode
or screen.
Press MODE or MENU.
Press MENU.
Press MODE.
FUNCTION Screen
Press MENU.
Press MODE.
Press MODE or MENU.
2240-3
MENU Screen
Press MENU.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents