Advertisement
3.3. LAN Inspection
3.3.1. Equipment & Condition
▪ Each other connection to LAN Port of IP Hub and Jig
3.3.2. LAN inspection solution
▪ LAN Port connection with PCB
▪ Network setting at MENU Mode of TV
▪ Setting automatic IP
▪ Setting state confirmation
→ If automatic setting is finished, you confirm IP and MAC
Address.
3.3.3. WIDEVINE key Inspection
- Confirm key input data at the "IN START" MENU Mode.
3.3.4. DTCP Inspection
- Confirm Key input at the "IN START" MENU Mode
- Below DTCP check on "IN START" MENU is enabled only
for Models which "DTCP key" tool option is "ON"
- Only EU suffix models DTCP key option is on. (ex.
47LA790V-ZA.KEUYLJG)
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
3.4. LAN PORT INSPECTION(PING TEST)
Connect SET → LAN port == PC → LAN Port
SET
3.4.1. Equipment setting
(1) Play the LAN Port Test PROGRAM.
(2) Input IP set up for an inspection to Test Program.
*IP Number : 12.12.2.2
3.4.2. LAN PORT inspection(PING TEST)
(1) Play the LAN Port Test Program.
(2) Connect each other LAN Port Jack.
(3) Play Test (F9) button and confirm OK Message.
(4) Remove LAN cable.
- 14 -
PC
LGE Internal Use Only
Hide quick links:
Advertisement
