Event; Site Alarm - Panasonic WJ-GXD400 Setup Instructions

Event

When an event signal (alarm notification) is received from another network device, an alarm action starts in accor-
dance with the setting.

Site alarm

The alarm action at site alarm occurrence is specified.
1
Click the [Event] button on the setup menu.
2
Click the [Site alarm] tab.
The "Site alarm" window will be displayed.
Setup items
I Site alarm
Select "On" or "Off" to determine whether or not to acti-
vate the site alarm.
I Originating port number
Specify the port number to receive the site alarm signal.
Default: 1818
I Alarm message display
Select "On" or "Off" to determine whether or not to dis-
play the message to notify event occurrence.
I Output terminal
Select "On" or "Off" to determine whether or not to pro-
vide the alarm signal output at event occurrence.
I Alarm reset timer
Select the period from alarm occurrence to alarm can-
cellation from the following.
Off/10s/20s/30s/1min/5min
Default: 20s
22
3
Perform the settings for each item.
Refer to the following for further information about
the settings for each item.
4
Click the [Set] button.